|
STD • HDG
|
Boat
Available
in 4d thru 60d
Tremont boat nails are widely used for wooden boat construction.
Use the Hot-Dip Galvanized nails only for this application.
Standard Boat Nails are often used to face-nail floors.
PRICE LIST (pdf)
(FAQ)
|
STD • HDG
|
Box
Available in 4d thru 10d
These nails are lighter than Common Cut-nails, but are used
for similar applications.
Designed originally for the construction of wood boxes and
crates, they are also used for nailing fences, siding, face-nailing
floors, framing and roughing in.
PRICE LIST (pdf)
(
FAQ)
|
|
STD only
|
Brad
Available in 2d only
These round-headed brads are popular for cabinet work and
selected furniture applications.
PRICE LIST (pdf)
(FAQ)
|
STD • HDG
|
Clinch Rosehead
Available in 3d thru 20d
These button-head nails are malleable enough to be clinched
if desired. Often used for furniture repair, cabinet work,
interior walls, face-nailing wide board flooring, batten
doors, paneling and counter tops.
PRICE LIST (pdf)
(FAQ)
|
|
STD only
|
Clout
Available in 3/4" thru 6d
Similar in design to Shingle Nails, but made from lighter
gauge steel. Useful for box and crate construction, and
for the application of thin siding and paneling. Also used
for furniture repair, cabinet work, batten doors and counter
tops.
PRICE LIST (pdf)
(FAQ)
|
STD • HDG
|
Common Rosehead
Available in 6d thru 20d
Popular nails for framing, roughing in, scaffolding and
face-nailing pine or softwood floors. Also used for cabinet
work, interior and exterior siding, furniture repair, batten
doors and paneling.
PRICE LIST (pdf)
(FAQ)
|
|
STD • HDG
|
Common Siding
Available in 7d only
Popular for general purposes work, as well as nailing wood
fences and applying wood siding over sheathing.
Hot-Dip Galvanized nails are recommended for use on any
exterior applications.
PRICE LIST (pdf)
(FAQ)
|
STD • HDG
|
Common
Available in 6d thru 20d
Useful for framing, roughing, face-nailing floors and paneling
and sculpturing.
PRICE LIST (pdf)
(FAQ)
|
|
STD • HDG
|
Cut Spike
Available in 10d thru 80d
Used for heavy construction work, these strong spikes drive
well through planking and heavy timber for deck and bridge
work. The cut spike is made on a Circa 1865 nailer by heating
steel plate to a reddish hue and then feeding it by hand
into this massive machine. Spikes are cut at a rate of about
40 per minute.
PRICE LIST (pdf)
(FAQ)
|
BK OXIDE
HDG
|
Decorative Wrought Head
Available in 2d thru 10d
Designed to simulate the hand-forged nails of the late 1700's,
the head is three-sided and the nail has a black oxide coating.
Ideal for authentic restoration and antique effect. Uses
include rough sawn interior and exterior siding, face-nailing
flooring, batten doors, paneling, counter tops and cabinet
work.
PRICE LIST (pdf)
(FAQ)
|
|
STD only
|
Headless
Available in 7/8" thru 4d
This pattern is used in wood applications where a slender
nail will minimize splits. Often used for furniture repair,
cabinet work and picture framing and casement work.
PRICE LIST (pdf)
(FAQ)
|
STD only
|
Fine Finish
Available in 3d thru 6d
These slender nails are popular for wood applications where
a slim brad-head nail is appropriate, such as furniture
repair, cabinet work, casings, batter doors, paneling and
counter tops.
PRICE LIST (pdf)
(FAQ)
|
|
STD • HDG
|
Fire Door Clinch
Available in 6d thru 10d
Popular for use in fabricating laminated fire doors, clapboard
siding, face-nailing wide board flooring and wood fences.
Available Standard and Hot-Dip Galvanized.
PRICE LIST (pdf)
(FAQ)
|
STD • HDG
|
Flooring
Available in 3d thru 20d
Great for laying tongue and groove hardwood and soft wood
flooring. Not to be used for face-nailing flooring because
head is too small. Nails are available Hardened or Hot-Dip
Galvanized for applications requiring rust-resistant protection.
PRICE LIST (pdf)
(FAQ)
|
|
STD only
|
Foundry
Available in 10d thru 60d
Also called Tie Keys, these nails are used for foundry casting
work, concrete form work and metal sculpturing.
PRICE LIST (pdf)
(FAQ)
|
STD only
|
Hinge
Available in 3d thru 20d
Ideal for fastening antique hinges and sometimes used for
face-nailing doors. Head style is similar to a Boat Nail,
but hinge nails are made from a slightly lighter gauge of
steel to give more nails per pound.
PRICE LIST (pdf)
(FAQ)
|
|
STD • HDG
|
Masonry
Available in 4d thru 20d
These heat-treated cut nails are ideal for nailing furring
strips and other materials to cinder block, mortar joints,
new concrete and brick walls. Blunt point and tapered shank
cause less spalling during nailing and hold tighter than
round wire nails. Also used to face-nail hardwood flooring.
PRICE LIST (pdf)
(FAQ)
|
STD only
|
Sheathing
Available in 8d thru 20d
Useful for attaching sheathing to wood studs and for face-nailing
thick board flooring. Similar to Cut Spikes, but these nails
have flat heads.
PRICE LIST (pdf)
(FAQ)
|
|
STD only
|
Shingle
Available in 2d thru 10d
These shingle nails have blunt points to reduce wood splits,
and the cut nail shank holds tight.
PRICE LIST (pdf)
(FAQ)
|
STD only
|
Slating
Available in 2d only
Originally used to fasten slate roofing, this nail has a
larger head than many cut nails and can be used for applications
where a large head is desired.
PRICE LIST (pdf)
(FAQ)
|
