image

Base Moldings
Casing (Door & Window)
Crown Molding
Decorative Blocks
Panel & Picture Mold
Trim Series

image
Chair Rail Moldings
TinyTIMBERS® brand certified

Chair rail is a molding typically applied about 36" (or 1/3 of the wall) up from the floor, which encircles the room. Originally it was used to prevent chairs from damaging walls, but today it is used primarily as a key decorative piece to set the tone of a particular room - especially in traditional and colonial design.

Chair rail molding, in rooms with higher ceilings, can often times be used in conjunction with other moldings for a "compound" molding. Installation Tip: When a chair rail intersects a window or door casing, consider a simple mitered return on the chair rail.

Priced per LINEAL (RUNNING) FOOT $ USD

6' - 16' Random Lengths  - click here for specified lengths
Non-stock molding orders less than 500 lineal feet per item
are subject to a $50 setup fee per profile.

DISCOUNT: 1,000 lf - Less 20%   ·  2000 lf - Less 30%
please call for greater volume discounts
.

Discounts apply to minimum footage per item on a single order. Please note that varied sizes of the same profile and matching patterns, as noted, may be combined to achieve discount requirements.

Profile #

Description Poplar

Red Oak

Variable
Height

CH201 Chair Rail
11/16 x 2-3/4

1.18

1.55

-----------

CH202
stock
Chair Rail
3/4 x 3-1/4

1.40

1.83

-----------

CH203 Chair Rail
3/4x 3-1/4

1.40

1.83

-----------

CH204 Chair Rail
1 x 3-1/4

2.11

3.16

-----------

CH945 Historic Chair Rail
1-1/4 x 2

1.30

1.94

-----------

CH949 Historic Chair Rail
7/8 x 2-3/8

1.54

2.31

-----------

Alternate species available and quoted on request. Due to our diverse offering and customized nature of our moldings, most profiles are  milled to order unless marked as "stock".  Stock moldings and over runs are available without per item minimum footage requirements or setup fees. 

Please keep in mind that many of our moldings may be slightly modified to match an existing pattern. However, if you are unable to locate a particular item, we can affordably replicate an existing profile with just a sketch or sample trim piece. Please contact us with your special requests.

click on above images to view each full scale profile.

Chair Rail was originally used to decoratively protect the walls

PRODUCT SPECIFICATIONS

Moldings are precision milled to order from the finest grade, kiln dried hardwoods. Each orders is stretch wrapped into hand manageable bundles and banded for shipment.

Proudly Manufactured in the USA with American Hardwoods

image
image


TinyTIMBERS
10214 W Deputy Pike
Deputy, IN 47230

Local Tel:      812.866.4415
Toll Free Tel: 800.966.4415
Toll Free Fax: 877.866.9221

© Copyright 1999-2017 All rights reserved