|Door & Window Casings
- Page 8
TinyTIMBERS® brand certified
Casing is used to frame door and window openings, forming a visual
foundation that is important in establishing the character of a
Casings should be complimentary to the other room trims and proportionately
sized approximately 1/3 smaller than the base (for example: A 3-1/4"
casing would be appropriate with a 5-1/4" base mould.) It
is equally important to allow plenty of room between your electric
boxes (and/or wall area) and your cased door openings to accommodate
the width of your casing.
Hint: When calculating footage requirements,
don't forget to measure both sides of each interior door opening.
Decorative plinths, rosettes and keystones
are also used with casings.
Alternate species available and quoted on request. Due to our
diverse offering and customized nature of our mouldings, most profiles
are milled to order unless marked as "stock".
Stock mouldings and over runs are available without per item minimum
footage requirements or setup fees.
Please keep in mind that many of our mouldings may be slightly
modified to match an existing pattern. However, if you are unable
to locate a particular item, we can affordably replicate an existing
profile with just a sketch or sample trim piece. Please contact
us with your special requests.
[ Back ] [ Next ]